RESISQUIM - INVESTIGATION OF THE RESISTANCE OF CONTAINERS/PACKAGING OF POLYETHYLENE TO DANGEROUS FLAMMABLE, TOXIC AND CORROSIVE LIQUID CHEMICALS |
|
In the paint production, phytosanitary and metal-mechanic sectors, dangerous liquid chemical substances and mixtures are used, such as certain acids, bases, solvents and toxins, normally classified as dangerous goods, which must be transported in good quality containers. Many of... |
|
FGVA PCK0 - BATTEST - INVESTIGATION ON THE VALIDATION FOR THE SAFE TRANSPORTATION OF ELECTRICAL BATTERIES (VIBRATIONS AND SHOCKS) |
|
Currently and due to the restrictions in the commercialization of combustion vehicles, the transition to electric vehicles is being carried out. To do this, it must be validated that the elements that store energy meet the demanding automotive requirements to ... |
|
ECODAMPING -CHARACTERIZATION OF THE CUSHIONING CAPACITY OF SUSTAINABLE MATERIALS, FOR USE IN TECHNICAL PACKAGING SYSTEMS. |
|
The damping capacity of the materials is established by different experimental methods based on impact tests on the materials. The most widespread method is the one described in the ASTM D1596 standard. This method provides some damping curves, which ... |
|
INPROTEM - INVESTIGATION OF THE CUSHIONING CAPACITY OF DIFFERENT MATERIALS WITH PROTECTIVE CAPACITY, TAKING INTO ACCOUNT THE DIFFERENT ENVIRONMENTAL CONDITIONS THAT OCCUR IN THE DISTRIBUTION OF THE PRODUCTS. |
|
The INPROTEM project is going to investigate the protection capacity of different packaging materials, taking as a reference factor the conditions of temperature and relative humidity that occur in the logistics cycles of any industrial product. The ... |
|
CARTONSAFE - RESEARCH TO PROVIDE PAPER AND CORRUGATED CARDBOARD WITH FUNGICIDAL AND VIRICIDAL CAPACITY THROUGH EXTERNAL TREATMENTS |
|
In the last two years, the consumption of corrugated cardboard packaging has increased due to several factors, among which the growth of electronic commerce stands out. However, the current pandemic has also generated a special interest in security in ... |
|
TRANSVAC - DEVELOPMENT OF PACKAGING, STORAGE AND TRANSPORT PROTOCOLS OF PHARMACEUTICAL PRODUCTS. |
|
The pharmaceutical sector works with very strict quality standards for its products. However, there are two other fundamental factors such as packaging systems and distribution, which are not yet at the same level of control. This project ... |
|
PACKBEST - INVESTIGATION OF THE INFLUENCE OF WAVE PROFILES ON THE BEHAVIOR OF CORRUGATED CARDBOARD PACKAGES DURING TRANSPORT OPERATIONS. |
|
Corrugated cardboard packaging is used extensively by practically all industrial sectors for the handling, transport and storage of goods. If we take into account the segregation by materials used in the manufacture of packaging and ... |
|
GVA PCK0 - OPTIPACK - INVESTIGATION OF THE SUSTAINABLE OPTIMIZATION OF PACKING SYSTEMS FOR HANDLING AND TRANSPORT |
|
One of the strategic lines of action carried out by AIDIMME focuses on the field of research and development of packaging systems, and consists of research into packaging materials and elements to improve their efficiency ... |
|
CARQUIMA - INVESTIGATION OF PACKAGED PRODUCTS, THE PACKAGING THAT CONTAINS THEM AND THEIR PACKAGING SYSTEMS. PACKAGING SYSTEMS PCK0 |
|
With this project, the minimum use requirements for single-use pallets will be established, differentiating between flat support or 2-point rack support and establishing the load evenly distributed. An own initial analysis methodology will be established ... |
|
ONDUBEST-INVESTIGATION OF THE INFLUENCE OF WAVE PROFILES ON THE BEHAVIOR AND PROPERTIES OF CORRUGATED CARDBOARD |
|
Corrugated cardboard packaging is widely used by practically all industrial sectors for the handling, transport and storage of goods. However, there are no exhaustive and updated studies that relate the quality of corrugated papers ... |
|
REMOVAL OF HAZARDOUS SUBSTANCES IN POLYETHYLENE PACKAGES USING SUPERCRITICAL CARBON DIOXIDE (SC-CO2) IN RECYCLING PROCESS |
|
HDPE high density is a material widely used for the manufacture of containers and packaging for the transport of dangerous goods. When these containers and packaging finish their function they become a hazardous waste, which must be managed ... |
|