"IDENTAG 19-20"IDENTAG-DESIGN AND DEVELOPMENT OF AN INDIVIDUAL PARTS IDENTIFICATION SYSTEM IN THE MANUFACTURING PROCESS - IDENTAG DESCRIPTIONTo try to solve this problem of identification and location of parts in an industrial plant, adding as an additional value the traceability that would be obtained at the level of individual element, the project proposes the objective of designing and developing an identification element based on radio frequency. The identification element must be designed in such a way that it can be inserted or adhered to pieces of board or composite materials of wood fibers, paper, cardboard, plaster, plastic, etc. In this case the challenge is to place the element in a non-visible place of the pieces so that it does not alter its aesthetics (for example inserted in the body of the piece, or glued to the edge that is then covered) and it must also be possible to insert or paste automatically at the speed of the process. The reading of these chips can be done several meters away, as long as the antenna is well designed and the assembly is adequately protected. OBJECTIVESThe general objective of the project is to design and develop an identification system for individual parts based on radiofrequency technology, which can be used in the header processes in an automated way, so that all manufactured parts have individual identification throughout the process of manufacturing. This identification will serve to know the location of the piece and its production status, to communicate with the process machines and to manage the traceability of each piece and the products that are manufactured with them. EXPLANATORY VIDEORESULTS OBTAINEDYear 2020: SUMMARY OF RESULTS Year 2020: IDENTAG PARTIAL RESULTS PUBLISHED NEWSgeneral broadcasthttp://actualidad.aidimme.es/2020/07/29/aidimme-concepto (...)http://actualidad.aidimme.es/2020/06/17/difusion-resulta (...)http://actualidad.aidimme.es/2020/06/15/identificacion-i (...)http://actualidad.aidimme.es/2020/01/21/difusion-proyect (...)http://actualidad.aidimme.es/2019/12/19/especial-difusio (...)http://actualidad.aidimme.es/2020/02/17/utilizacion-de-e (...)http://actualidad.aidimme.es/2019/09/18/problema-identif (...)GRANT132.375,00 € € Objective Sectors by CNAECNAE: 3102 - Manufacture of kitchen furniture - Number of target companies: 666 (155 from the Valencian Community) CNAE: 3101 - Manufacture of office furniture and e - Number of target companies: 574 (115 in the Valencian Community) CNAE: 3109 - Manufacture of other furniture - No. of target companies: 5579 (1327 in the Valencian Community) Objective Sectors by ActivityMANUFACTURERS - Number of target companies: 108 (39 of the Valencian Community) TRACTOR COMPANIESThanks to its support and signature of the "declaration of participation" the project has been funded. RANDAL EUROPEA, SA MANUEL ROMERO, SA FAUS INTERNATIONAL FLOORING, SLU ROYO SPAIN, SL GAMA-DECOR, SA METALICAS MAGUISA, SL LAGRAMA, SL MICUNA, SLU COMPANIES DIFFUSION R&D PROJECTSThey want to know first-hand the evolution of the project, and its progress to the final result. COMPANIES TRANSFER KNOWLEDGEThey will implement technologies, develop strategies or look for new models based on the results. |