Spanish English Print

AIDIMME / Dissemination of projects

In compliance with the basic legislation on the Transparency Law (Law 19 / 2013) we provide access to public information regarding projects co-financed by public bodies and the amount of subsidy.

Filter projects by type

Filter projects by state

R&D line

Name

Enter Start Date

 

and End date

CNAE




FGVA SUR0 - CORCLIM - DURABILITY OF COATINGS AS A FUNCTION OF AGGRESSIVENESS AGAINST CORROSION IN DIFFERENT NATIONAL AREAS

Corrosion is a typical defect of metal surfaces due to the oxidation process. To reduce this effect and increase the durability of materials, metal parts are coated as a protection method. Even so, the deterioration of the material depends ...

Project Number: 22300007
Grant Agreement: IMAMCA/2023/2
Duration: From 01/01/2023 to 31/12/2023

Coordinated at AIDIMME by: SOLERA GADEA, GEMA
R&D Line: MODIFIED SURFACES


 

ENCLOSURE - DEVELOPMENT OF INTELLIGENT COVERINGS THAT CONTRIBUTE TO ENERGY SAVING AND ENVIRONMENTAL IMPROVEMENT

This research focuses on the study of intelligent coatings that contribute to energy savings and environmental improvement. Energy efficiency in buildings is one of the strategic priorities of the European Union to achieve climate neutrality in 2050. To...

Project Number: 22200007
Grant Agreement: IMAMCA/2022/2
Duration: From 01/01/2022 to 31/12/2022

Coordinated in AIDIMME by: JUAN PUCHADES,FRANCISCO
R&D Line: MODIFIED SURFACES


 

SIN VIR - AVI LINE - OBTAINING SURFACES WITH BACTERICIDAL AND VIRUCIDE FUNCTIONALITY

In this project, it is intended to obtain viricidal substances for SARS-CoV-2 based on prior knowledge of antimicrobial and bactericidal materials. Thanks to this, the material itself will degrade the virus, preventing it from being infective and cutting the chain of ...

Project Number: 22100036
Grant Agreement: INNEST / 2021/81
Duration: From 01/03/2021 to 30/09/2023

Coordinated in AIDIMME by: MARCO ALEIXANDRE, ALICIA
R&D Line: MODIFIED SURFACES


 

HEA CLADDING - DEVELOPMENT OF HIGH ENTROPY MATERIALS THROUGH PROJECTION TECHNIQUES

The high level of demand in some fields of industry such as the energy or aerospace sector requires materials in constant evolution. These sectors are always on alert before the appearance of new materials in any of their ...

Project Number: 22200058
Grant Agreement: IMDEEA / 2022/17
Duration: From 01/09/2022 to 30/09/2023

Coordinated in AIDIMME by: NIÑEROLA GONZALEZ, RUBEN
R&D Line: MODIFIED SURFACES


 

FORESPINT - DEVELOPMENT OF COATINGS WITH BIOCIDAL EXTRACTS FROM AGROFOREST WASTE

The FORESPINT project wants to provide a different and closer to the market outlet for the residual forest and agricultural biomass of the Valencian Community, incorporating bioproducts with antimicrobial activity extracted from certain residues in coatings for the...

Project Number: 22200055
Grant Agreement: IMDEEA / 2022/6
Duration: From 01/07/2022 to 30/09/2023

Coordinated in AIDIMME by: MARCO ALEIXANDRE, ALICIA
R&D Line: MODIFIED SURFACES


 

ENTROPY - DEVELOPMENT OF HIGH ENTROPY MATERIALS THROUGH THERMAL PROJECTION

The current project is presented due to the current boom in high entropy materials in the various research groups related to metallic materials. The main objective of the project is to obtain high entropy materials to be able to ...

Project Number: 22100057
Grant Agreement: IMDEEA / 2021/4
Duration: From 01/09/2021 to 30/09/2022

Coordinated in AIDIMME by: NIÑEROLA GONZALEZ, RUBEN
R&D Line: MODIFIED SURFACES


 

FILTAIR - SANITIZING SURFACE FOR AIR TREATMENT IN CLOSED SPACES

The FILTAIR project will generate metallic and plastic surfaces with sanitizing properties that can be applied directly in new indoor air purification systems. The new system has a two-stage disinfection, the first consists of ...

Project Number: 22100058
Grant Agreement: IMDEEA / 2021/13
Duration: From 01/07/2021 to 30/09/2022

Coordinated in AIDIMME by: VALERO GOMEZ, ANA Mª
R&D Line: MODIFIED SURFACES


 

RECUFAD - FUNCTIONALIZATION OF COATINGS OF POLYMERIC STRUCTURES, OBTAINED THROUGH ADDITIVE MANUFACTURING TECHNOLOGIES.

Provide specific functionalities to polymers used in additive manufacturing using SLS (Selective Laser Sintering) technology. For this, two functionalization alternatives are proposed: - Additivation of the polymer powder used as raw material - Surface activation of the manufactured part and subsequent functionalization The ...

Project Number: 22100007
Grant Agreement: IMAMCC / 2021/1
Duration: From 01/01/2021 to 31/12/2021

Coordinated in AIDIMME by: POCOVI MARTINEZ, SALVADOR
R&D Line: MODIFIED SURFACES


 

PROTECT HIM

In this research project, nanostructured and mesostructured antibacterial coatings will be developed on Ti-6Al-4V alloys, which is the most used material for the manufacture of prostheses due to its resistance to corrosion, good mechanical properties and great biocompatibility. ...

Project Number: 22000054
Grant Agreement: IMDEEA / 2020/33
Duration: From 01/07/2020 to 30/09/2021

Coordinated in AIDIMME by: BOSCH MOSSI, FRANCISCO
R&D Line: MODIFIED SURFACES


 

RICORR - CORROSION INDICATOR COATINGS

The project will develop a coating that visually indicates when the corrosion process begins in the coated metals. To this end, microcapsules or mesoporous silica particles with colorants inside will be synthesized and incorporated into the coating. The microcapsules ...

Project Number: 22000056
Grant Agreement: IMDEEA / 2020/34
Duration: From 01/07/2020 to 30/09/2021

Coordinated in AIDIMME by: BOSCH MOSSI, FRANCISCO
R&D Line: MODIFIED SURFACES


 

T-WEAR - DEVELOPMENT OF ADVANCED ANODIC LAYERS RESISTANT TO WEAR UNDER HIGH TEMPERATURE.

The purpose of the T-WEAR project is to develop advanced anodic layers to strengthen resistance to wear at high temperature by ordering pore growth through pulsating currents, a technique that proposes the use of a high current ...

Project Number: 22000058
Grant Agreement: IMDEEA / 2020/31
Duration: From 01/07/2020 to 30/09/2021

Coordinated in AIDIMME by: NIÑEROLA GONZALEZ, RUBEN
R&D Line: MODIFIED SURFACES


 

FUNGISTOP - DEVELOPMENT OF PAINTS WITH ANTIFUNGAL PROPERTIES THROUGH THE ADDITION OF BIOCIDALS OF NATURAL ORIGIN

The FUNGISTOP project will develop paints that are characterized by maintaining hygienic indoor environments by applying biocides that limit the development of fungi. The biocides used will be of natural origin in order to preserve ...

Project Number: 22000043
Grant Agreement: IMDEEA / 2020/25
Duration: From 01/07/2020 to 30/09/2021

Coordinated in AIDIMME by: IBIZA PALACIOS, Mª DE SALES
R&D Line: MODIFIED SURFACES


 

WALL4WOOD - IMPROVEMENT OF THE DIMENSIONAL STABILITY, THE DURABILITY OF THE WOOD AND PREVENTION OF THE GROWTH OF FUNGI THROUGH HYDROPHOBIC COATINGS.

In this research project, the aim is to develop hydrophobic coatings on structural wood to avoid partially or completely the absorption of moisture by the wood. These coatings will preferably be developed using silica sol-gel technology. Also, coatings ...

Project Number: 22000060
Grant Agreement: IMDEEA / 2020/32
Duration: From 01/04/2020 to 30/09/2021

Coordinated in AIDIMME by: POCOVI MARTINEZ, SALVADOR
R&D Line: MODIFIED SURFACES


 

GVA SUR0 - SMARTCOATING - SOLUTIONS FOR OBTAINING INTELLIGENT COATINGS

During the execution of this project, it is intended to study and identify solutions and technologies associated with the field of smart coatings. On the one hand, the encapsulation, in silica nanocases, of a corrosion indicator additive to ...

Project Number: 22000007
Grant Agreement: IMAMCC / 2020/1
Duration: From 01/01/2020 to 31/12/2020

Coordinated in AIDIMME by: POCOVI MARTINEZ, SALVADOR
R&D Line: MODIFIED SURFACES


 

PUCO2 - DEVELOPMENT OF ADHESIVES AND PAINTS FOR THE FOOTWEAR AND FURNITURE SECTOR FROM CO2 FROM INDUSTRIAL FACILITIES OF THE VALENCIAN COMMUNITY

PUCO2 is a project in collaboration with the AIMPLAS, INESCOP and ADIMME technology centers, as well as a series of tractor companies in the Valencian Community that maintain an increasing interest in their CO2 emissions and their use. In ...

Project Number: 21900068
Grant Agreement: IMIDEC / 2019/5
Duration: From 01/01/2020 to 15/11/2021

Coordinated in AIDIMME by: MARCO ALEIXANDRE, ALICIA
R&D Line: MODIFIED SURFACES


 

BARPINT - DEVELOPMENT OF COATINGS WITH BARRIER EFFECT AND OTHER FUNCTIONALITIES OF THE SURFACES. MODIFIED SURFACES SUR0

A study has been carried out on the following fields of the R&D line of modified surfaces. 1.- SOL-GEL coatings to improve the anticorrosive characteristics of a coating and to increase the hydrophobic and antibacterial characteristics in metallic coatings of faucets. 2.- Study of ...

Project Number: 21900079
Grant Agreement: IMAMCC / 2019/1
Duration: From 18/12/2019 to 18/12/2019

Coordinated in AIDIMME by: BLASCO MOLLÁ, FRANCISCO
R&D Line: MODIFIED SURFACES


 

ANTIBACTERIAL - DEVELOPMENT OF SURFACES WITH ANTIMICROBIAL PROPERTIES THROUGH THE APPLICATION OF FINISHES WITH BIOCIDAL PROPERTIES OF NATURAL ORIGIN AND ENVIRONMENTALLY SUSTAINABLE.

The growth of microorganisms in objects, surfaces, etc. It is practically inevitable and inherent to life on our planet. Depending on the nature of the surface the growth will occur to a greater or lesser extent, however it will be present in the ...

Project Number: 21900026
Grant Agreement: IMDEEA / 2019/6
Duration: From 01/07/2019 to 30/06/2020

Coordinated in AIDIMME by: IBIZA PALACIOS, Mª DE SALES
R&D Line: MODIFIED SURFACES


 

PROTECT IT- DEVELOPMENT OF ANTIMICROBIAL COATINGS BASED ON SILVER NANOPARTICLES ON TITANIUM ALLOY EMPLOYED IN PROSTHESIS.

This research project aims to develop antibacterial coatings on Ti-6Al-4V prostheses. The most commonly used material for the manufacture of prostheses is the Ti-6Al-4V alloy due to its corrosion resistance, good mechanical properties and great ...

Project Number: 21900030
Grant Agreement: IMDEEA / 2019/10
Duration: From 01/05/2019 to 30/09/2020

Coordinated in AIDIMME by: MOLINA PUERTO, JAVIER
R&D Line: MODIFIED SURFACES


 

TRIBAN-EFFECT OF TEMPERATURE ON TRIBOLOGICAL BEHAVIOR WITH THE MORPHOLOGY OF ANODIC LAYERS.

The project aims to establish knowledge bases on the behavior of the anodic layers against various temperatures, from the point of view of mechanical properties, specifically on the wear resistance of these layers, thereby increasing knowledge ...

Project Number: 21900036
Grant Agreement: IMDEEA / 2019/65
Duration: From 01/05/2019 to 30/06/2020

Coordinated in AIDIMME by: NIÑEROLA GONZALEZ, RUBEN
R&D Line: MODIFIED SURFACES


 

DESINK- DEVELOPMENT OF FUNCTIONAL INKS BASED ON MICRO AND NANOCARGAS FOR APPLICATION AS COATINGS IN DIFFERENT INDUSTRIAL SECTORS

In areas with high pedestrian traffic, commercial or public areas, materials with high technical performance are required, especially resistance to wear. Currently there are floors, both ceramic and wooden materials that reach high resistance, but their ...

Project Number: 21600052
Grant Agreement: IMDECA / 2016/51
Duration: From 01/01/1900 to 31/12/2017

Coordinated in AIDIMME by: PÉREZ CAMPOS, ROSA Mª
R&D Line: MODIFIED SURFACES