DYNAMIC DECARBONISATION PATHWAYS FRAMEWORK INTEGRATING TECHNOLOGICAL, SOCIAL, AND POLICY INNOVATIONS FOR SUSTAINABLE RENOVATIONS IN THE BUILT ENVIRONMENT |
|
The building sector holds a prominent position in energy consumption (40%) and CO2 emissions (36%) within the European Union. Furthermore, current construction and renovation practices are huge raw material consumers and highly waste producers. In response to this critical issue, the European... |
|
FGVA BIO0 - EMRIMAD - EVALUATION, MONITORING AND INTELLIGENT REHABILITATION OF HISTORIC FLOORS WITH WOODEN JOISTS |
|
The objective of the project is to develop a methodology for the intelligent, rapid and economic evaluation and rehabilitation of historic wooden joist floors. The methodology aims to: a) preserve European heritage; b) give new uses to... |
|
SNUG - INNOVATIVE METHODOLOGY BASED ON CIRCULAR ECONOMY AND ARTIFICIAL INTELLIGENCE TO FOSTER THE TRANSITION TO SUSTAINABLE AND VERY HIGH ENERGY PERFORMANCE BUILDINGS AT A COST OPTIMAL LEVEL |
|
Buildings are responsible for over 40% of the energy consumption and CO2 emissions in the EU. Accordingly, The CE has established ambitious building standard aiming to transform all existing buildings into ZEBs by 2050 to reach a fully decarbonised building stock. SNUG... |
|
WOODBYSAT - DEVELOPMENT OF ANALYSIS METHODS, NON-DESTRUCTIVE AND BY REMOTE SENSING, FOR THE OPTIMIZATION OF THE EXPLOITATION AND IMPROVEMENT OF THE QUALITY OF PINUS HALEPENSIS WOOD |
|
The objective of this project is the study and evaluation of adult stems (with the possibility of logging for quality wood uses such as structural use), of the most representative pine in the Valencian Community, Pinus halepensis (pine ... |
|
MOTOVEGI - RESEARCH AND DEVELOPMENT OF INNOVATIVE MORTARS WITH LOW CARBON FOOTPRINT MADE FROM PLANT FIBERS OF LOCAL ORIGIN |
|
The incorporation of fibers to mortars allows improving their performance, tensile strength, ductility, energy absorption capacity, fatigue behaviour, and resistance to abrasion and impact. When the fibers are vegetable as is the case... |
|
PTFOR: MOVING TOWARDS A SUSTAINABLE FUTURE |
|
PTFOR is the National Support Group of the European Forestry Technology Platform and a member of the Circular Economy Interplatform Group and promotes the Strategic Research Agenda, developing a public-private collaboration strategy to promote the competitiveness of the forestry sector and... |
|
AVI - EDIFBIO - APPLICATION OF BIOMATERIALS AND RCD IN PREFABRICATED ELEMENTS OF INTERIOR COVERING OF BUILDINGS |
|
The project delves into the development and application of highly sustainable prefabricated elements in the interior envelope of buildings with insulation and comfort functions. Their manufacture is based on plant fibers typical of the CV without industrial use... |
|
FGVA BIO0 - SISPATINT 2023 - TEST, CONFIGURATION AND IMPROVEMENT OF THE PATINT SYSTEM, AND STUDY AND ANALYSIS OF BIOMATERIALS AND WOOD AND DERIVATIVE STRUCTURES |
|
The SISPATINT 2023 project, belonging to the AIDIMME Biomaterials R&D line, consists of several applied research activities to test, configure and improve the PATINT system, as well as activities for the study and analysis of biomaterials and ... |
|
WOOD FOREST SATELLITE - STUDY OF THE STATE OF FOREST MASSES THROUGH SATELLITE TOOLS FOR TIMBER PURPOSES |
|
Currently, the majority of forest masses in the Valencian Community are not being exploited for various reasons. Among them is the lack of knowledge of the resource that is owned, where exactly it is located or the quality that this resource can offer. ... |
|
SISPATINT 2022 - TEST, CONFIGURATION AND IMPROVEMENT OF THE PATINT SYSTEM, AND STUDY AND ANALYSIS OF BIOMATERIALS AND WOOD STRUCTURES |
|
The SISPATINT 2022 project, framed in the AIDIMME Biomaterials R&D line, consists of several applied research activities to test, configure and improve the PATINT system, as well as activities for the study and analysis of biomaterials and ... |
|
PRESOST DEVELOPMENT OF PREFABRICATED AND HIGH SUSTAINABILITY CONSTRUCTION ELEMENTS |
|
The Metalworking, Furniture, Wood, Packaging and Related Technological Institute (AIDIMME) is carrying out the project entitled Development of prefabricated and highly sustainable construction elements - PRESOST -, aimed at researching and materializing prefabricated elements for the ... |
|
SUDOE WOODMARKETS - THE DIGITAL TRANSFORMATION AT THE SERVICE OF THE WOOD INDUSTRY OF THE SUDOE SPACE |
|
WOODMARKETS is a project that contributes to promoting the competitiveness of wood processing companies throughout their value chain. The digital transformation in the timber sector has started timidly and companies see it ... |
|
SPANISH FOREST TECHNOLOGICAL PLATFORM-PTFE |
|
Establish the technological development lines necessary to consolidate the Spanish forestry sector as an organized, innovative and employment-creating sector, capable of improving economic and environmental performance, and to guide the sector towards production patterns and ... |
|
AGROFOREF - OBTAINING CHEMICAL COMPOUNDS FROM AGROFORESTAL WASTE THROUGH BIO-REFINING PROCESSES FOR USE IN THE WOOD, FURNITURE AND CONSTRUCTION INDUSTRY. |
|
During the AGROFOREF project, the revaluation of certain by-products of the agri-food and forestry industry will be investigated in order, through different biorefining techniques, to obtain bio-products that have properties of interest to the industry and, especially, ... |
|
PTFOR CONSOLIDATION, SUSTAINABLE DEVELOPMENT GOALS AND GREEN DEAL |
|
The forestry sector was one of the sectors that seized the opportunity to establish a PTE and during 2004, they jointly developed a proposal for a "Technological Platform for the Forest Sector" (TFP). The founding international organizations, the Confederation of Forest Owners ... |
|
SISPATINT 2021 TEST, CONFIGURATION AND IMPROVEMENT OF THE PATINT SYSTEM, AND STUDY AND ANALYSIS OF BIOMATERIALS |
|
Within the AIDIMME Biomaterials R&D line, the SISPATINT 2021 project includes several applied research activities to test, configure and improve the PATINT system, as well as activities for the study and analysis of biomaterials. The innovative PATINT ... |
|
RESTRUCTMAD-INVESTIGATION AND DEVELOPMENT OF INNOVATIVE SOLUTIONS FOR REPAIR AND REINFORCEMENT FOR WOOD STRUCTURES |
|
The purpose of this project is to research and develop innovative solutions for the repair and reinforcement of wooden structures, with substantial improvements over existing ones: greater resistance and bearing capacity, lower environmental impact, lower cost and use of materials, lower ... |
|
GVA BIO0 - SISPATINT - TESTING, CONFIGURATION AND IMPROVEMENT OF THE PATINT SYSTEM, AND STUDY AND ANALYSIS OF BIOMATERIALS |
|
Within the AIDIMME Biomaterials R&D line, the SISPATINT project consists of different applied research activities to test, configure and improve the PATINT system, as well as activities for the study and analysis of biomaterials. |
|
MEND-ME - DEVELOPMENT OF A METHODOLOGY FOR THE NON-DESTRUCTIVE EVALUATION OF STRUCTURAL WOOD AND INNOVATIVE APPLICATION TO REHABILITATION |
|
The main objective of the project is to develop a non-destructive analysis methodology that allows to know the state and structural quality of the current or old wood. With it, rehabilitations of wooden structures can be executed in less time, of ... |
|
WOODPLASTFOC - IMPROVING THE IGNIFOUS PROPERTIES OF WOOD AND PLASTIC COMPOSITE MATERIALS (WPC) ACCORDING TO ITS FINAL USE |
|
The general objective of the project is the development of new wood and plastic composite products (Wood Plastic Composite - WPC), improved by the use of flame retardant additives, in order to offer fire performance, improved and adequate ... |
|
WOODTECH - PROMOTION OF INNOVATION FOR THE IMPROVEMENT OF THE COMPETITIVENESS OF SMES IN THE WOOD INDUSTRY OF SUDOE SPACE |
|
WOODTECH is a project of innovation and technology transfer, whose purpose is to contribute to making companies of first and second transformation of the SUDOE space wood (south-western Europe: Spain, Portugal and southern France) more competitive ... |
|
RESEARCH AND DEVELOPMENT OF INNOVATIVE ANCHORAGES FOR TEMPORARY WOOD CONSTRUCTIONS |
|
The general objective of the project is to research and develop innovative mechanical anchors that can be used in general in any temporary wooden construction. Some examples of temporary constructions are pavilions, hostels, exhibition fairs, sports facilities, structures for concerts, extensions ... |
|