"PROTECTIVE" PROTECTOR - DEVELOPMENT OF A HIGH-LEVEL PROTECTION PROCESS FOR MANUFACTURING REACTIVE METALLIC MATERIALS USING HYBRID LMD-CNC TECHNOLOGY DESCRIPTION The PROTECTOR project focuses on improving the hybrid LMD-CNC manufacturing process to be able to process metals with greater protection against oxidation. For this, it is intended to design and install a protection system for the manufacturing area to minimize the oxidation of the manufactured parts during cooling, and with said improvement, to be able to develop process parameters and characterize the result from a mechanical, chemical point of view. and microstructural. Companies will be able to assess the benefits of the process with real cases of interest to companies OBJECTIVES The main objectives of the project are: • The definition, characterization and evaluation of the variables involved in the hybrid LMD-CNC manufacturing process in materials for industrial use. • The development of a protection system in the hybrid LMD-CNC system, to minimize oxidation during manufacturing when materials for industrial use are used but are sensitive to oxidation. Project Number: 22200083 Grant Agreement: IMDEEA / 2022/65 Duration: From 01/06/2022 to 30/09/2023 Coordinated in AIDIMME by: BLOEM IRAZABAL,CARLOS ALBERTO R&D Line: ADDITIVE MANUFACTURE RESULTS OBTAINED Year 2023: The processing parameters in hybrid manufacturing with metal alloys have been studied using LMD-CNC hybrid technology. The parameters involved in AM have also been characterized and adjusted with this machining center in at least two iron-based alloys. To determine the manufacturing parameters, the basic melting parameters were determined: o Beam power o Extrusion speed o Beam speed Regarding the mechanical, chemical and structural characterization, multiple analyzes have been carried out to determine the amount of oxygen. The values ​​obtained indicate that the surface layer is the area with the highest oxygen content, this being no greater than half a micron, and that in the mass area of ​​the specimen the content is constant and low. Regarding the mechanical characterization and more specifically the tensile test, all values ​​comply with the regulations for the manufacture of liability parts or even parts for the healthcare sector. Deliverables:    PUBLISHED NEWS general broadcast https://actualidad.aidimme.es/2024/01/10/https-actualida (...) https://actualidad.aidimme.es/2023/10/18/fin-proyectos-2 (...) https://actualidad.aidimme.es/2023/10/02/aidimme-muestra (...) https://actualidad.aidimme.es/2023/04/04/proyectos/ (...) https://actualidad.aidimme.es/2023/01/24/aidimme-impulsa (...) https://actualidad.aidimme.es/2023/01/03/aidimme-resulta (...) https://actualidad.aidimme.es/2022/11/03/congreso-habita (...) https://actualidad.aidimme.es/2022/10/03/aidimme-feria-h (...) https://actualidad.aidimme.es/2022/07/27/protector-inici (...) https://actualidad.aidimme.es/2022/07/13/proyectos-inici (...) Technical dissemination, transfer https://actualidad.aidimme.es/2023/04/21/protector-avanc (...) GRANT 204.003 € € TARGET AUDIENCE AND IMPACT MEASUREMENT 1536 Access to the project website 1693 Access to news published on own websites. Total Accesses: 3229 Objective Sectors by CNAE CNAE: 2550 - Forging, stamping and drawing of metal - Number of target companies: 82 (41 from the Valencian Community) CNAE: 2591 - Manufacture of drums and iron barrels - No. of target companies: 5 (2 from the Valencian Community) CNAE: 2592 - Manufacture of metal containers and packaging - No. of target companies: 90 (11 in the Valencian Community) CNAE: 2651 - Manufacture of instruments and appliances d - Number of target companies: 28 (10 from the Valencian Community) CNAE: 2652 - Manufacture of watches - No. of target companies: 2 (1 from the Valencian Community) CNAE: 2660 - Manufacture of radiation equipment, ele - Number of target companies: 10 (7 in the Valencian Community) CNAE: 2711 - Manufacture of engines, generators and tr - Number of target companies: 21 (6 from the Valencian Community) CNAE: 2712 - Manufacture of distribution devices - No. of target companies: 71 (13 from the Valencian Community) CNAE: 2740 - Manufacture of lamps and electrical appliances - No. of target companies: 304 (105 in the Valencian Community) CNAE: 2751 - Manufacture of household appliances - No. of target companies: 20 (5 from the Valencian Community) CNAE: 2752 - Manufacture of domestic appliances not the - Number of target companies: 6 (3 from the Valencian Community) CNAE: 2790 - Manufacture of other material and equipment - No. of target companies: 242 (43 from the Valencian Community) CNAE: 2811 - Manufacture of engines and turbines, except - No. of target companies: 10 (5 from the Valencian Community) CNAE: 2812 - Manufacture of hi transmission equipment - No. of target companies: 23 (11 in the Valencian Community) CNAE: 2813 - Manufacture of other pumps and compressors - No. of target companies: 11 (3 from the Valencian Community) CNAE: 2814 - Manufacture of other taps and valves - No. of target companies: 22 (8 from the Valencian Community) CNAE: 2815 - Manufacture of bearings, gears and or - No. of target companies: 10 (8 in the Valencian Community) CNAE: 2821 - Manufacture of ovens and burners - No. of target companies: 10 (6 from the Valencian Community) CNAE: 2822 - Manufacture of lifting machinery and - No. of target companies: 42 (21 from the Valencian Community) CNAE: 2823 - Manufacture of office machinery and equipment - No. of target companies: 3 (0 in the Valencian Community) CNAE: 2824 - Manufacture of power tools m - Number of target companies: 3 (1 from the Valencian Community) CNAE: 2825 - Manufacture of ventilation machinery - Number of target companies: 24 (7 from the Valencian Community) CNAE: 2841 - Manufacture of machine tools for - Number of target companies: 15 (7 from the Valencian Community) CNAE: 2849 - Manufacture of other machine tools - Number of target companies: 44 (29 from the Valencian Community) CNAE: 2891 - Manufacture of machinery for the industry - Number of target companies: 16 (8 from the Valencian Community) CNAE: 2892 - Manufacture of machinery for industries - Number of target companies: 14 (9 from the Valencian Community) CNAE: 2893 - Manufacture of machinery for the industry - Number of target companies: 33 (26 from the Valencian Community) CNAE: 2894 - Manufacture of machinery for industries - Number of target companies: 22 (16 from the Valencian Community) CNAE: 2895 - Manufacture of machinery for the industry - Number of target companies: 5 (3 from the Valencian Community) CNAE: 2896 - Manufacture of machinery for the industry - Number of target companies: 9 (6 from the Valencian Community) CNAE: 2910 - Manufacture of motor vehicles - Number of target companies: 15 (9 from the Valencian Community) CNAE: 2931 - Manufacture of electrical and elec equipment - No. of target companies: 17 (7 from the Valencian Community) CNAE: 2932 - Manufacture of other components, parts - No. of target companies: 118 (52 from the Valencian Community) TRACTOR COMPANIES Thanks to its support and signature of the "declaration of participation" the project has been funded. TECNOCLAD LASER SOLUTIONS, SL GH ELECTROTERMIA, SAU COMET ENGINEERING, SL MIPESA MECANIZADOS, SLU TECHNOLOGY APPLIED TO THE MACHINERY, SL COMPANIES DIFFUSION R&D PROJECTS They want to know first-hand the evolution of the project, and its progress to the final result. COMPANIES TRANSFER KNOWLEDGE They will implement technologies, develop strategies or look for new models based on the results.